AC/DC TIG Welder | UNIMIG RAZOR 200A

AC/DC TIG Welder – The UNIMIG RAZOR™ 200 AC/DC gives you full control over High Frequency AC/DC TIG welding for incredible results from start to finish. Fitted with a portable 15 AMP plug and Pulse TIG functions, this is your go-to professional unit that works a treat on any worksite.

Tailor your TIG settings with a wide range of controllable parameters including Pre Gas Time, Start Current, Up Slope and Down Slope Time, Finish Current Level and Post Gas Time.

The all-new ARC TORCHOLOGY T2 TIG Torch comes standard with the RAZOR™ 200 AC/DC, offering up to 30% better power-to-weight ratio and longer consumable lifecycles. A Remote Foot Control can also be plugged into the machine for even more versatility.

• 15 AMP Plug
• AC/DC H/F TIG/STICK
• Pulse TIG Function
• Foot Control Ready

SPECIFICATIONS:

• Primary Input Voltage: 240V Single Phase
• Supply Plug: 15 Amp
• Rated Input Power (kVa): 6.0
• Ieff (A): 15.0
• Rated Output: 10-200A / 18.0V
• No Load Voltage (V): 9-68
• Protection Class: IP21S
• Insulation Class: F
• Power Factor: 0.7
• Minimum Generator (kVa): 9.0
• Dinse Connector: 35/50
• Standard: AS/NZ60974-1
• Welds: Mild Steel, Stainless Steel, Cast Iron, Silicon Bronze, Copper, Aluminium, Zinc Alloys
• TIG Function Type: AC/DC HF TIG / AC/DC Pulse
• TIG Welding Current Range: 10-200A
• TIG Duty Cycle @ 40°C: 25% @ 200A
• Stick Welding Current Range: 10-160A
• Stick Duty Cycle @ 40°C: 30% @ 160A
• Stick Electrode Range: 2.5-4.0mm
• Arc Force: 0-40

INCLUSIONS:

• 1 x RAZOR™ 200 AC/DC TIG Welder
• 1 x 4m High-Performance T2 TIG Torch
• 1 x 4m Twist Lock Electrode Holder
• 1 x 300 Amp Earth Clamp & Lead
• 1 x Argon Flowmeter Regulator
• 1 x 2m Gas Hose Complete with fittings
• Operating Manual
• 3 Years Product Warranty Covered By UniMig Australia

QUESTIONS?